Compare EV and petrol energy costs
A fair energy-cost comparison uses the same distance for both vehicles and the prices you would actually pay. A home tariff and a public rapid charger can produce very different EV results.
Choose a shared distance
Start with 100 miles, or your expected annual mileage. For petrol or diesel, enter realistic UK MPG and a pump price. For an EV, enter realistic miles per kWh and the electricity rate. These tools do not provide live prices; check your tariff or charger operator before entering a rate.
Account for charging losses once
Some electricity supplied by the charger does not end up as usable battery energy. If your vehicle efficiency is measured at the battery, allow for charging losses. A 10% loss of supplied energy means 90% reaches the battery, so divide battery energy by 0.9. If your consumption figure already measures electricity at the wall, do not add those losses again.
Try more than one charging scenario
Run the EV calculator once using your home rate and again using the public charging price you expect to pay. If you use both, weight their costs by the share of miles supported by each. Include any session, subscription or idle fees separately. For a special overnight rate, use it only for energy you can actually buy during that tariff window.
Keep energy savings separate from purchase costs
Energy cost is one part of ownership. Insurance, tyres, maintenance, purchase price and future resale value can change the total. Home charger installation and any electrical work are also costs to consider. These calculators do not predict them.
Test your assumptions
Repeat the calculation with lower efficiency and a higher energy price. If a decision depends on the most optimistic case, the saving may be fragile. Use your own journey mix, especially if you often drive fast motorway routes or short winter trips.
Estimate EV charging costs